search:3g modem linux相關網頁資料

    瀏覽:434
    日期:2024-04-22
    Recently I bought an Airtel 3G connection using Huawei E1731Bu-1 USB modem. As usual, I wanted to get it working in Debian GNU/Linux amd64 version. As a first step, installed the following packages using apt-get. sudo apt-get install ppp pppconfig wvdial ...
    瀏覽:707
    日期:2024-04-26
    1.) Install wvdial 2.) Add the following to /etc/wvdial.conf and adjust it for your operator settings: [Dialer nokia-usb] Modem = /dev/ttyACM0 Baud = 3600000 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 Init3 = Modem Type = USB Modem Area Code = Phone = *9...
    瀏覽:349
    日期:2024-04-27
    This blog is about: Open Source, Operating Systems (mainly linux), Networking and Electronics The information here is presented in the form of howtos. ... How to setup a USB 3G Modem on Raspberry PI using usb_modeswitch and wvdial Setting up a USB 3G ......
    瀏覽:1234
    日期:2024-04-26
    Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. Modem Port Scan< *1>: S0 S1 S2 S3 ttyUSB0: Device or resource busy Modem Port Scan< *1>: USB0 WvModem< *1>: Cannot get information for serial port. ttyUSB1< *1>: ATQ0 V1 E1 -- OK...
    瀏覽:1003
    日期:2024-04-21
    2014年12月26日 - Introduction. This article describes how to configure Huawei E1550 3G modems. This modem is generic modem device, but there are two ......
    瀏覽:1200
    日期:2024-04-24
    2015年1月25日 - This was originally written for Gentoo Linux which compiles ... It is possible to set the PIN that is sent to modem to unlock SIM card, how ever ......
    瀏覽:806
    日期:2024-04-23
    Getting linux to talk to a USB 3G modem is quite easy, here is a short guide on how this is done with usb_modeswitch....
    瀏覽:451
    日期:2024-04-20
    3G module tutorial. Linux. Plug in the device, and execute dmesg in console. With this we can see if we have the drivers of the device installed or not....