search:pdp context modification procedure相關網頁資料

pdp context modification procedure的相關公司資訊
瀏覽:492
日期:2026-04-24
– PDP context activation PDP address, QoS etc. are set UE must be in PMM-CONNECTED state – PDP context modification QoS etc. is modified UE must be in PMM-CONNECTED state – PDP context deactivation packet data session is released ......
瀏覽:1208
日期:2026-04-17
3.6 PDP Context A PDP context specifies access to an external packet-switching network. The data associated with the PDP context contains information such as the type of packet-switching network, the MS PDP address that is the IP address, the reference of...
瀏覽:545
日期:2026-04-22
PDP Context Modification An SGSN can, due to subscriber data changes, modify parameters that were negotiated during the PDP context activation procedure. For example, the QoS and radio priority parameters can be modified. The following PDP context ......
瀏覽:367
日期:2026-04-17
The SGSN can initiate a PDP Context Modification procedure, for example, if the MS performs a RAU to a new RNC or BSC offering a different QoS. In GSM, the BSC can also request the SGSN to initiate a PDP Context Modification, for example, due to load ......
瀏覽:803
日期:2026-04-19
REL-5 (Release 5) Reason for change: The PDP context modification procedure is invoked by the network in order to change the QoS negotiated during the PDP context activation procedure or at previously performed PDP context The procedure can ......
瀏覽:946
日期:2026-04-21
A TFT may be modified during a PDP context modification procedure initiated by the MS. A TFT is deleted when the associated PDP context is deactivated. During packet transmission between the MS and the external packet network, the GGSN will compare If ......
瀏覽:625
日期:2026-04-19
A TFT may be modified during a PDP context modification procedure initiated by the MS. This is illustrated in Figure 7. A TFT is deleted when the associated PDP context is deactivated. ......
瀏覽:1471
日期:2026-04-22
Figure 4-19 GGSN-initiated PDP context modification procedure. 3. The MS checks if it can accept the request. If yes, it sends a modify PDP context accept message to the SGSN. If no, it initiates deactivate PDP context procedure with the SGSN. 4....